Hundreds of CNC Machines at EZSystems

Haas VF-2 Vertical Machining Center

Specifications

ModelVF-2
BrandHAAS
TypeVertical Machining Centers
ControlCNC (HAAS)
X30 inch
Y16 inch
Z20 inch
Power30 HP
RPM10,000 RPM
ATC20
TableW14 inch
TableL36 inch
TaperCT 40
Axis3
Weight8,500 lbs
Length90 inch
Width95 inch
Height105 inch
catalogid125
mfgHAAS
mpnVF-2
titleHaas VF-2 Vertical Machining Center

Zero? Available Machines

Available Machine # Ez14380

  • Stock#:Ez14380
  • Price:$18,900
  • Year:1995
  • Region:West
  • Condition:Used
Travels: X-Axis: 30" Y-Axis: 16" Z-Axis: 20" Rapid Traverse Rates: 710 Inch Per Minute Cutting Feed Rates: 500 Inch Per Minute Spindle Nose to Table (Min.- Max.): 4" - 24" Table: Length: 36" Width: 14" Number of Std T-Slots: 3 T-Slot Width: 5/8" Max Weight on Table: 1500 lbs Spindle: Taper Size: 40 Speed Range: 0 - 7500 RPM Spindle Power: 20 HP Vector Dual Drive Max Torque: 90ft-lb @ 2000 RPM Automatic Tool Changer: Capacity: 20 + 1 Max Tool Weight: 12 lbs Max Tool Dia: 3.6" Max Tool Length: 13" Tool Changing Time: 3.2 Seconds General: Air Required: 100 psi, 4 scfm Power: 220v / 66FLA / 3-Phase Overall Dimensions: 90" x 88" x 100" High Weight: 7500 lbs HAAS VF-2 VMC Features: Upgraded LCD Monitor 4th Axis Ready ( drives and wiring installed ) Rigid Tapping Power Failure Detection Module User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling 20 + 1 automatic tool changer Programmable coolant Telescopic way covers Chip auger Floppy Drive Flood Coolant system RS-232 Port


Available Machine # Ez340

  • Stock#:Ez340
  • Price:$15,900
  • Year:1996
  • Region:Midwest
  • Condition:Used
Equipped With: Gear Box 4th Axis Pre-Wire Programmable Coolant Nozzle Rigid Tap Quickcode Programming Chip Auger


Available Machine # Ez3147

  • Stock#:Ez3147
  • Price:$12,500
  • Year:1996
  • Region:Midwest
  • Condition:Used
See Notes - ask about ATC Motor. Equipped With: 2-Speed Gear Box Rigid Tap Programmable Coolant Nozzle Chip Auger 4th Axis Pre-wire Quickcode 3.5” Floppy Drive. Machine is in good condition and can be viewed under power as needed.


Available Machine # Ez13498

  • Stock#:Ez13498
  • Price:Call
  • Year:1997
  • Region:Midwest
  • Condition:Used
X: 30 " Y: 16 " Z: 20 " Power: 30 hp RPM: 8100 rpm # ATC: 20 Table-W: 14 " Table-L: 36 " Taper: CT or BT 40 # Axis: 4 Control: CNC (HAAS) Haas controls: p cool 4th axis wired no drive Chip auger, 1 meg. Mem, 3.5" floppy disc, Rigid tap, Spindle Orientation Chip auger Condition: Excellent! 9817 cycle start hours


Available Machine # Ez14848

  • Stock#:Ez14848
  • Price:Call
  • Year:1997
  • Region:Midwest
  • Condition:Used
Specifications: Control Haas Table Size 36” x 14” X Axis Travel 30” Y Axis Travel 16” Z Axis Travel 20” Spindle Speeds 0 - 7,500 RPM Spindle Taper CT 40 Spindle Motor 15 HP Tool Changer Capacity 20 Machine Weight 8,500 Lbs Machine Dimensions 88”L x 93”W x 106”H Equipped With: 3.5” Floppy Drive Chip Auger 4th Pre-Wire Programmable Coolant Nozzle Quick Code Programming 4th Axis Pre-Wire Rigid Tap


Available Machine # Ez14381

  • Stock#:Ez14381
  • Price:Call
  • Year:1997
  • Region:West
  • Condition:Used
Travels: X-Axis: 30" Y-Axis: 16" Z-Axis: 20" Rapid Traverse Rates: 710 Inch Per Minute Cutting Feed Rates: 500 Inch Per Minute Spindle Nose to Table (Min.- Max.): 4" - 24" Table: Length: 36" Width: 14" Number of Std T-Slots: 3 T-Slot Width: 5/8" Max Weight on Table: 1500 lbs Spindle: Taper Size: 40 Speed Range: 0 - 7500 RPM Spindle Power: 20 HP Vector Dual Drive Max Torque: 90ft-lb @ 2000 RPM Automatic Tool Changer: Capacity: 20 + 1 Max Tool Weight: 12 lbs Max Tool Dia: 3.6" Max Tool Length: 13" Tool Changing Time: 3.2 Seconds General: Air Required: 100 psi, 4 scfm Power: 220v / 66FLA / 3-Phase Overall Dimensions: 90" x 88" x 100" High Weight: 7500 lbs HAAS VF-2 VERTICAL MACHINING CENTER Features: 20HP High Torque Spindle 4th Axis Ready ( drives and wiring installed ) Rigid Tapping Power Failure Detection Module User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling Brushless servo drive motors on all axis 20 + 1 automatic tool changer Programmable coolant Telescopic way covers Chip auger Floppy Drive Flood Coolant system RS-232 Port


Available Machine # Ez332

  • Stock#:Ez332
  • Price:$19,500
  • Year:1997
  • Region:Midwest
  • Condition:Used
Equipped With: Gear Box 4th Axis Pre-Wire Programmable Coolant Nozzle Rigid Tap Quickcode Programming Chip Auger


Available Machine # Ez13386

  • Stock#:Ez13386
  • Price:Call
  • Year:1997
  • Region:Midwest
  • Condition:Used
Model: VF 2 Year: 1997 Condition: Excellent Specifications: Table Size: 36" x 14" X-Axis Table Travel: 30" Y-Axis Saddle Travel: 16" Z-Axis Spindle Head Travel: 20" Spindle nose to table 4" to 24" Rapid Traverse Rate: 710 IPM Cutting Feed rate 500 IPM Spindle Taper: CAT-40 Spindle Speeds: 8,000 rpm, direct drive Spindle Drive Motor: 15 Automatic Tool Changer: 20 Tool Change Time Tool to Tool 1.6 Sec Maximum Tool Diameter: 3.5” Maximum Tool Weight: 12 lbs. Required Floor Space (Dimensions) 122" x 107" x 108" Maximum Tool Weight: 8,000 LBS Equipped With: Haas controls: Programmable coolant 4th axis wired - no drive Chip auger, 1 meg. Mem, 3.5" floppy disc Rigid tap Spindle Orientation Chip auger Brushless servo’s Rigid tap Condition: Excellent! Only - 9817 cycle start hours In plant and under power.


Available Machine # Ez333

  • Stock#:Ez333
  • Price:Call
  • Year:1997
  • Region:Midwest
  • Condition:Used
CAN BE SUPPLIED WITH 4TH AXIS TABLE AND 2 KURT VISES. TRAVELS: X-30'', Y-16'', Z-20'', TABLE SIZE: 36'' X 14'', CAT 40 TAPER, SPINDLE SPEED: UP TO 8,000-RPM, W/4TH AXIS DRIVE, 20-POSITION ATC, PROGRAMMABLE COOLANT NOZZLE, THROUGH SPINDLE COOLANT, CHIP AUGER CONVEYOR, BRUSHLESS SERVOS, USB UPGRADE, QUICK CODE PROGRAMMING, RIGID TAPPING


Available Machine # Ez10987

  • Stock#:Ez10987
  • Price:Call
  • Year:1997
  • Region:Northeast
  • Condition:Used
X: 30 " Y: 16 " Z: 20 " Power: 30 hp RPM: 7500 rpm # ATC: 20 Table-W: 14 " Table-L: 36 " Taper: CT 40 Control: CNC (HAAS) Geared head Printer-Frie


Available Machine # Ez10963

  • Stock#:Ez10963
  • Price:Call
  • Year:1997
  • Region:Midwest
  • Condition:Used
1997 Haas VF-2B CNC Equipped With: Haas CNC Control Rigid Tapping Programmable Coolant 16 MB Memory (Must Confirm) 4th Axis Pre-Wire Gear Box Machine Rigid Tapping Macros Spindle Orientation


Available Machine # Ez14613

  • Stock#:Ez14613
  • Price:Call
  • Year:1999
  • Region:Midwest
  • Condition:Used
30" X 16" X 20" Haas Model VF-2 Vertical Machining Center (1999) 3 Axis, 40 Taper, 20HP, 7500 RPM, Prog Coolant Nozzle, Haas CNC Specifications (Preliminary) Table Working Surface: 36" x 14" X-Axis Travel: 30" Y-Axis Travel: 16" Z-Axis Travel: 20" Spindle Taper: 40 Spindle Speed: 7500 RPM Rapid Traverse Rate: 710 IPM Tool Changer Positions: 20 Main Motor Drive: 20 Vector Drive Equipped With: ** EXCELLENT ** Equipped With: Haas CNC Control, Programmable Coolant Nozzle, Brushless Servos, 20 ATC, Programmable Coolant, Chip Auger, Floppy Drive, 20HP Vector Drive, Manual Pulse Generator


Available Machine # Ez14710

  • Stock#:Ez14710
  • Price:$34,500
  • Year:2004
  • Region:Midwest
  • Condition:Used
CNC Machine, Haas VF-2D Vertical machining center Stock Number: 3530 Haas VF-2D Serial No. 37351 Age: 2004 Condition: Very Good Specification Description Table Size 36" x 14" Maximum Table Load 3,000 Lbs. Spindle Nose to Table Top 4"- 24" X-Axis Travel 30" Y-Axis Travel 16" Z-Axis Travel 20" Rapid Traverse Rate X, Y , & Z 1,000 IPM Cutting Feed Rate .1- 500 IPM Spindle Taper 40 Spindle Speeds 0- 7,500RPM Tool Changer Capacity 24 Station ATC Max Tool Weight 12 Lbs. Machine Weight, Approx 8,500 Lbs. Dimensions, Approx. 110" x 93" x 105" Equipped With: 4th, 5th Axis Pre-Wireand Drive, Rigid Tap, Quick code, swing arm tool changer, Coolant system, auto door and all available manuals


Available Machine # Ez12065

  • Stock#:Ez12065
  • Price:$42,000
  • Year:2007
  • Region:Northeast
  • Condition:Used
4th axis ready, Super Speed 1400 IPM, Rigid tapping, Chip auger, The value package it came with includes,-CC, -PCOOL, -COORD, -IPS-V, -4AXBL, -RJH, -MACRO 4th AXIS READY.


Available Machine # Ez14711

  • Stock#:Ez14711
  • Price:Call
  • Year:2007
  • Region:Midwest
  • Condition:Used
Specifications: Control Haas Table Size 36"x14" Max Table Load 3,000 lbs X-Axis Travel 30" Y-Axis Travel 16" Z-Axis Travel 20" Spindle Speed 10,000 RPM Spindle Motor 20 HP Tool Changer 20 Spindle Taper CT 40 Equipped With: 10,000 RPM Spindle Automatic Air Gun 16 MB Of Extended Memory Chip Auger Custom Macros Intuitive Programming System Rigid Tap


Available Machine # Ez13066

  • Stock#:Ez13066
  • Price:Call
  • Year:2012
  • Region:Midwest
  • Condition:Used
Specifications: X-AXIS TRAVELS 30" Y-AXIS TRAVELS 16" Z-AXIS TRAVELS 20" TABLE TOP TO SPINDLE NOSE 4"-24" MAX TABLE LOAD 3,000 LBS MAX SPINDLE SPEED 8,100 RPM SPINDLE TAPER CAT 40 TOOL CAPACITY 24 + 1 TOOLS SPINDLE POWER 20 HP RAPID TRAVERSE RATE XYZ 1000 IPM CUTTING FEEDRATE XYZ 650 IPM OPERATING DIMENSIONS 121" X91" X109" (Z FULLYEXT) Equipped With HAAS CNC CONTROL MAAC MULTI AUGER CHIP CONVEYOR DUAL SIDE AUGER AND FRONT DISCHARGE AUGER IPS-INTUITIVE PROGRAMMING SYSTEM VQC-VISUAL QUICK CODE HIGH INTENSITY LIGHTING 4AXD 4TH AXIS DRIVE AND WIRING 2 SPEED GEAR BOX SIDE MOUNT TOOL CHANGER ALL AVAILABLE MANUALS


Available Machine # Ez13963

  • Stock#:Ez13963
  • Price:Call
  • Year:2012
  • Region:Midwest
  • Condition:Used
HAAS CNC CONTROL WITH 15" COLOR LCD SCREEN 1 MB PROGRAM MEMORY, USB PORT, CHIP AUGER RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING) STANDARD PRESSURE COOLANT THRU SPINDLE 55 GALLON FLOOD COOLANT, CHIP AUGER, PEECOOL STANDARD COOLANT SYSTEM WITH TANK AND PUMP FULLY ENCLOSED GUARDS, ALL AVAILABLE MANUALS


Hundreds of CNC Machines at EZSystems
Sales: 714-815-4968
3400 W MacArthur Blvd., #E   Santa Ana, CA 92704Copyright 1991-2016